How to maintain drip irrigation tape production equipment?

The maintenance of drip irrigation tape production equipment is an important part of ensuring the long-term stable operation of the equipment, improving production efficiency and the quality of drip irrigation tape products.

Daily maintenance

Equipment surface cleaning: After the equipment is shut down, the dust and plastic debris on the equipment surface should be promptly removed. The equipment surface can be wiped with a clean soft cloth. For oil stains that are difficult to clean, special cleaning agents can also be used. The oil and dust on the equipment surface and electrical component surfaces should be cleaned regularly to prevent the equipment from rusting and affecting electrical performance.

Mold cleaning: After using the drip irrigation tape production equipment, the residual plastic melt in the mold must be carefully cleaned. If the residual plastic cools and solidifies in the mold, it will affect the molding quality of the drip irrigation tape produced by the equipment next time, and may cause the drip irrigation tape surface to be uneven or dimensional deviation. You can use soft tools to clean the mold to avoid damaging the mold surface.

Component Inspection

● The machine will vibrate during operation. Long-term vibration may cause the screws to loosen, which may affect the matching accuracy between the equipment parts, and even cause parts to fall off. Therefore, it is necessary to frequently check whether the screws between the various parts of the machine are loose to ensure that the equipment is firm and reliable. It is also necessary to check the tension of the transmission belt on time to avoid slipping or wear caused by too loose or too tight belts.

● Carry out a comprehensive inspection of all parts of the equipment, including key parts such as extruders, tractors, and punchers, to ensure that they are in good working condition. For the screw and barrel of the extruder, check their wear regularly; check the wear and blockage of the mold regularly; and check and adjust the traction device and winding device regularly.

● Lubrication work: Apply high temperature resistant lubricating butter on various moving parts such as bearings and guide rails to reduce friction and wear, which helps the equipment run smoothly.

Equipment Storage

If the equipment needs to be parked for a long time, it should be thoroughly cleaned first, and then anti-rust oil should be applied on the surface of the equipment to prevent rust. The equipment should be stored in a dry and well-ventilated environment, and a dust cover can also be used to cover the equipment to prevent dust from entering the interior of the equipment.

Training and guidance

Provide training and guidance to operators on equipment maintenance to improve their awareness and skills in machine maintenance.

Precautions

● After the equipment stops working due to parking or other reasons, even if the time is short, the corresponding heating positions such as the barrel and the head must be heated and the requirements must be met before restarting. Cold machine start is strictly prohibited.

● During maintenance, safety operation requirements must be strictly followed to ensure the safety of personnel and equipment.

In summary, the maintenance of drip irrigation tape production equipment needs to be carried out comprehensively and carefully. Through daily cleaning, inspection, lubrication and other maintenance measures, the normal operation of the equipment can be ensured and the service life can be extended.