How to use drip irrigation tape production equipment?

The use of drip irrigation tape production equipment involves multiple links. The following is a detailed use step:

Preparation before startup：

●Remove dust and debris from the surface and components of the equipment to prevent them from entering the produced drip irrigation tape and affecting its quality. At the same time, keep the production site clean.

● Before using the drip irrigation tape production equipment, you should fully check all parts of the equipment, such as the extruder, traction device, punching device, winder, etc. to ensure that they have no problems such as component damage.

● According to production needs, debug various parameters of the equipment, such as the temperature of the extruder, traction speed, etc. The setting of these parameters will directly affect the production quality and efficiency of the drip irrigation tape.

Control during production:

● After turning on the power according to the operating instructions of the equipment, you should pay close attention to the operation of the equipment and the quality of the drip irrigation tape product, including whether the extruder discharges uniformly and whether the produced drip irrigation tape meets the requirements. If there is any abnormality, the equipment parameters should be adjusted in time or the machine should be stopped for inspection and processing.

● If the equipment fails during the production process, it should be stopped immediately for inspection and repair. Before the fault is eliminated, it shall not be forced to start running to avoid damage to the equipment.

Shutdown operation:

● When the machine is to be stopped, first stop adding raw materials to the feeding system and let the raw materials in the hopper be gradually squeezed out.

●After the raw materials in the extruder are basically extruded, turn off the screw drive motor and heating device of the extruder and stop the operation of the extruder.

●As the extruder stops, turn off the power of auxiliary equipment such as the traction machine and the winder in turn to stop them from working.

●After the equipment stops completely, clean the equipment and keep it clean and tidy.

●Finally, turn off the main power supply of the equipment to ensure that the equipment is in a power-off state.

Maintenance and care：

The daily maintenance and care of the drip irrigation tape production line is the key to ensuring the long-term and stable operation of the equipment. The equipment should be cleaned, lubricated and inspected regularly to detect and deal with potential problems in a timely manner.

The correct use of drip irrigation tape production equipment requires strict compliance with the operating procedures, and the preparation work before startup, operation and monitoring during production, and cleaning and maintenance after shutdown are done to ensure the normal operation of the equipment and produce high-quality drip irrigation tape products.